Snow Plow Kits and Tracks for Polaris General
Last updated: October 2, 2026.
Getting a Polaris General ready for winter usually comes down to two upgrades: a plow to move snow, and tracks to keep moving through it. Below you will find 4 KFI snow plow kits listed by model and year, plus the manufacturer specs that matter when you choose.
Fitment is model and year specific. KFI matches each plow mount to a specific machine, and Camso builds a mount kit for each vehicle. Find your exact year and trim in the tables below.
Not sure which listing matches your machine? Call 877-203-4939 with your year, model and trim and we will confirm it before you order.
KFI Snow Plow Kits for Polaris General
Each KFI kit we sell is a complete system built around the vehicle-specific mount KFI calls out for that machine. A kit includes:
- Vehicle-specific plow mount matched to your model and year.
- KFI PRO 2.0 push tube (#106300). KFI lists it as a front-mount design with 30 inches or more of lift height, six blade pitch adjustments of 5 degrees each, and three angle positions that rotate the blade up to 25 degrees. It is built from 1-1/2 inch, 12-gauge square steel tubing, carries a 2-year KFI warranty and is made in the USA.
- Your choice of blade: KFI Pro-S steel or Pro-Poly, in 60, 66 or 72 inches.
- Plow strap, mounting hardware and instructions. A KFI winch can be added on the product page.
Every KFI Plow Kit We Carry for Polaris General
Prices shown are the kit's starting price; the final price depends on the blade and options you choose on the product page.
| Model and Years | Starting Price |
|---|---|
| 2016-2026 Polaris General 1000 | $797.99 |
| 2017-2025 Polaris General 4 1000 | $797.99 |
| 2020-2026 Polaris General XP 4 1000 | $797.99 |
| 2020-2026 Polaris General XP 1000 | $797.99 |
Which Blade Width?
Overall vehicle width, from the manufacturer's published specs:
| Model | Overall width | Source |
|---|---|---|
| Polaris General XP 1000 Sport (2027) | 64" | www.polaris.com |
| KFI blade width | Path when straight | Approx. path when angled 25 degrees |
|---|---|---|
| 60" | 60" | 54.4" |
| 66" | 66" | 59.8" |
| 72" | 72" | 65.3" |
Angled path is blade width multiplied by the cosine of 25 degrees, the maximum angle KFI lists for the PRO 2.0 push tube. Real-world cleared width also depends on skid setting and snow conditions.
See our blade size guide for more models.
Pro-S Steel or Pro-Poly Blade
| Spec (per KFI) | Pro-S Steel | Pro-Poly |
|---|---|---|
| Blade face | 11-gauge steel | Flexible poly face on a 3/16" Grade 50 steel rib and frame |
| Face height | 16" (about 21" with snow flap) | 21" (about 27" with snow flap) |
| Snow flap | 7" two-ply rubber flap on 66" and 72" | 7" two-ply rubber flap |
| Weight 60" / 66" / 72" | 75 / 81 / 85 lbs | 81 / 82 / 87 lbs |
| KFI list price 60" / 66" / 72" | $356.95 / $460.95 / $499.95 | $542.95 / $589.95 / $615.95 |
| Part numbers | 105060 / 105066 / 105072 | 105860 / 105866 / 105872 |
| Wear bar and skids | Two-sided 3/16" x 3" Grade 50 steel wear bar; adjustable 3" diameter Grade 50 steel skids | |
| Warranty and origin | 2-year KFI warranty; made in the USA | |
Camso UTV 4S1 Tracks for Polaris General
The Camso UTV 4S1 is Camso's all-season track system for side-by-sides from 400 to 1000cc. Each kit includes four track systems (two front, two rear) and the mount kit adapted to your vehicle. Camso lists about 2,520 square inches of ground contact, about 5 inches more ground clearance than stock tires, track widths of 12.5 inches front and 14 inches rear, and system weights of 103 lbs per front and 120 lbs per rear system.
From Camso's UTV 4S1 owner's manual: the system is designed for a maximum real speed of 40 km/h (about 25 MPH), tracks change speedometer and trip meter readings by about 35 percent, the vehicle should always run in 4x4 mode, and the first 4 hours or 80 km should be a break-in period on wet or lubricated ground such as snow, mud or water.
For every track kit we carry by model and year, see our Camso UTV 4S1 tracks for Polaris UTVs fitment guide.
Running a Plow and Tracks Together
Tracks raise the machine, which changes where the plow mount sits relative to the ground. Each KFI kit page asks two questions so you can add the right parts in one order:
- Does your machine have tracks? Choose yes to add the KFI UTV tracks extension bracket (KF-106330).
- Does your machine have a lift kit? Choose yes to add a KFI leveling kit for a 1 to 2 inch lift.
Read more in our guide to plowing with Camso tracks.