Michelin Tweel
for Ferris Zero Turns
Eliminate flat casters and downtime on your Ferris zero turn with Michelin X® Tweel™ airless tires. Complete fitment data for 42 configurations across IS, ISX, SRS, 300S, 500S, FW, and ProCut series.
Airless poly-resin spokes replace the pneumatic caster wheels that cause the most mower downtime.
Fixed caster geometry keeps deck level under load — no pressure variation changing your cut.
Drive wheel Tweels available for IS, ISX, SRS, 300S, 500S, and FW series — full flat-free operation.
Airless by design. No valves, no pressure gauges, no pre-season inflation — just mount and mow.
Tweel vs. Pneumatic Caster
- Flats from debris, wire, and glass on every property
- Pressure loss changes cut height mid-job
- Mid-day downtime for repairs on busy routes
- Separate tire and wheel — more parts to fail
- Shorter service life in commercial conditions
- Zero puncture risk — completely airless
- Constant geometry keeps deck level all day
- No mid-route repairs — finish every job
- Single integrated unit with no separate tire
- 2–3x longer service life than pneumatics
Ferris Tweel Fitment Tips
The fitment chart covers three part types: caster Tweels, bushing adapters, and rear drive Tweels. Not every Ferris model uses all three — check your specific model row.
IS 600Z, IS 700Z, ISX 800, ISX 2200, ISX 3300, and SRS Z3X require a bushing adapter in addition to the caster Tweel. Order all required parts together.
Several Ferris models (IS 600Z, IS 700Z, ISX 2200, SRS Z3X) have different part numbers by deck size. Confirm your exact deck width before ordering.
A few models — including IS 6200 72", SRS Z1, and F160Z — have caster fitments but no confirmed rear Tweel. Caster Tweels alone eliminate your most common flat risk.
Ferris Zero Turn Fitment Chart
The table below covers all 42 confirmed Ferris fitments for Michelin X® Tweel™ Turf airless tires, including the Ferris IS 600Z, IS 700Z, IS 2100Z, IS 2600Z, IS 3200Z, ISX 800, ISX 2200, ISX 3300, SRS Z3X, SRS Z2, 300S, 400S, 500S, FW25, FW45, and ProCut S. Part numbers link directly to product pages. Data sourced from the official Michelin X® Tweel™ Turf Fitment Guide.
| Model | Deck | Caster Tweel(s) | Bushing | Rear Tweel |
|---|---|---|---|---|
| F60Z | 36" | — | — | MC-78245 |
| F160Z | 48" | MC-52441 & MC-05768 | — | — |
| F210Z | 61" | MC-52441 & MC-05768 | — | MC-54411 |
| F320Z | 61" | MC-52441 & MC-05768 | — | MC-25913 |
| 300S | 42" | — | — | MC-01133 |
| 300S | 48" | — | — | MC-01133 |
| 300S | 52" | — | — | MC-01133 |
| 400S | 48" | — | — | MC-78245 |
| 500S | 48" | — | — | MC-37968 |
| 500S | 52" | — | — | MC-37968 |
| 500S | 61" | — | — | MC-37968 |
| IS 600Z | 44" | — | — | MC-78245 |
| IS 600Z | 48" | MC-73818 & MC-41011 | MC-38182 | MC-08755 |
| IS 600Z | 52" | MC-73818 & MC-41011 | MC-38182 | MC-08755 |
| IS 700Z | 52" | — | — | MC-08755 |
| IS 700Z | 52" | MC-73818 & MC-41011 | MC-38182 | MC-08755 |
| IS 700Z | 60" | MC-73818 & MC-41011 | MC-38182 | MC-08755 |
| IS 2100Z | 52" | — | — | MC-54411 |
| IS 2100Z | 61" | — | — | MC-54411 |
| IS 2600Z | 61" | MC-52441 & MC-05768 | — | MC-54411 |
| IS 3200Z | 61" | MC-73818 & MC-41011 | MC-38182 | MC-25913 |
| IS 6200 | 72" | — | — | — |
| ISX 800 | 52" | MC-73818 & MC-41011 | MC-38182 | MC-54411 |
| ISX 800 | 60" | — | — | MC-54411 |
| ISX 2200 | 52" | MC-73818 & MC-41011 | MC-38182 | — |
| ISX 2200 | 60" | MC-73818 & MC-41011 | MC-38182 | MC-54411 |
| ISX 2200 | 72" | MC-73818 & MC-41011 | MC-38182 | MC-54411 |
| ISX 3300 | 60" | MC-73818 & MC-41011 | MC-38182 | MC-25913 |
| ISX 3300 | 72" | MC-73818 & MC-41011 | MC-38182 | MC-25913 |
| SRS Z3X | 52" | MC-52442 & MC-05768 | MC-65019 | MC-14365 |
| SRS Z3X | 60" | MC-52442 & MC-05768 | MC-65019 | MC-54411 |
| SRS Z3X | 72" | — | — | MC-54411 |
| SRS Z2 | 52" | — | — | MC-54411 |
| SRS Z2 | 60" | — | — | MC-54411 |
| SRS Z1 | 36" | — | — | — |
| SRS Z1 | 48" | — | — | — |
| FW25 | 36" | — | — | MC-01133 |
| FW25 | 48" | — | — | MC-01133 |
| FW45 | 48" | — | — | MC-01133 |
| FW45 | 52" | — | — | MC-01133 |
| FW45 | 61" | — | — | MC-78245 |
| ProCut S | 61" | — | — | MC-47260 |
Source: Michelin X® Tweel™ Turf Fitment Guide — Download PDF
Ferris Tweel FAQ
The Ferris IS 700Z 52" deck uses MC-08755 rear Tweel (no caster kit). The 52" configuration with caster kit uses MC-73818 and MC-41011 casters with MC-38182 bushing and MC-08755 rear. The 60" deck uses MC-73818 and MC-41011 casters, MC-38182 bushing, and MC-08755 rear Tweel.
The Ferris ISX 3300 uses MC-73818 and MC-41011 casters, MC-38182 bushing, and MC-25913 rear Tweel for both the 60" and 72" deck configurations.
The Ferris 500S uses MC-37968 rear Tweel for all three deck sizes — 48", 52", and 61". No caster Tweel or bushing is required for this model.
The Ferris SRS Z3X 52" uses MC-52442 and MC-05768 casters, MC-65019 bushing, and MC-14365 rear Tweel. The 60" uses MC-52442 and MC-05768 casters, MC-65019 bushing, and MC-54411 rear Tweel. The 72" uses only MC-54411 rear Tweel.
Most Ferris models have at least a caster or rear Tweel fitment. The exceptions in the current guide are the IS 6200 72", SRS Z1 (36" and 48" decks), and F160Z 48", which do not have a confirmed rear Tweel. The F160Z does have caster Tweels available.