Michelin Tweel Fitment Guide: Exmark Mowers

Michelin Tweel™ Fitment Guide: Exmark Mowers

Equip your Exmark mower with Michelin X Tweel™ airless radial tires—also known as airless Tweel tires—for flawless, zero-flat mowing performance. Below is the complete fitment table for Exmark models ranging from 42″ to 144″. Click any MSPN to view full product details on Farm & Trail.

Popular Exmark Models & Tweel Tips

Top Exmark series:
- Radius E 48″ / 52″ / 60″
- Radius S 48″ / 52″ / 60″
- Radius X 60″
- Quest E 42″ / 50″
- Quest S 54″ / Quest X 48″
- Lazer Z E 48″ / 52″ / 60″ / 72″
- Lazer Z S 52″ / 60″ / 72″
- Lazer Z X 60″ / 72″ / 96″
- Lazer Z Diesel 60″ / 72″ / 144″
- Navigator 48″ / 42″
- Vertex S 48″ / 52″ / 60″
- Vertex X 60″ / 72″
- Vertex V 52″
- Turf Tracer X 52″ / 60″

Why Exmark owners choose airless Tweel tires:

• Zero-flat reliability: Airless Tweel tires eliminate punctures and day-ruining flats on rough terrain.
• Exceptional turf-friendly design: The open-spoke construction reduces scalping and ensures a uniform cut.
• Maintenance-free operation: No need to check air pressure—just keep Tweel spokes clean and debris-free.

• Front Tweel & Bushing Installation: Remove the factory caster wheel. Install front Tweel MSPN (MC-73818 or MC-41011) along with bushing MC-34193 or MC-40653 where specified. Ensure the bushing seats fully and torque lug nuts to manufacturer’s specification.
• Rear Tweel Swap: Remove the OEM rear pneumatic wheel and install the correct Tweel MSPN from the table above (e.g., MC-37968 for Radius E/S/X and Quest X, MC-77185 for Radius X and Lazer Z E, MC-50357 for Lazer Z S/X, MC-25913 for Lazer Z Diesel, MC-78245 for Quest E/S, Navigator, Vertex S, Turf Tracer X, MC-06358 for Vertex X, MC-08755 for Lazer Z E/S, Vertex V).
• Deck Clearance Check: After installing front and rear Tweels, raise the deck fully and spin each Tweel by hand to confirm zero contact with deck or frame components.
• Torque Requirements: Torque all wheel nuts to manufacturer’s specification (typically 80?ft-lbs). Re-check torque after one hour of use to ensure proper seating under load.
• Keep Spokes Clean: Rinse Tweel spokes with a low-pressure hose after each use to remove grass and debris. Avoid high-pressure washers directly on the spokes to preserve the polyurethane bond.

Frequently Asked Questions

Notes

• For a complete PDF fitment guide, download here.
• Questions about custom fitment? Contact us.